pyroLock

pyroLock

The multi-point locking system for smoke and fire protection

Doors are common points at which fires can spread to other parts of buildings. They must therefore remain closed permanently and reliably in case of emergency to stop fire and smoke in their tracks and gain valuable time for the rescue services to reach anyone trapped.

Protection has priority

When it comes to fire protection, the primary concern is safety. This is also indicated by the changes to general social conditions, the subject of safety taking on more and more importance, both publicly and privately. In any fire, human lives are at stake. But at the same time, goods should be protected and the fire checked as well. Doors are common points at which fires can spread to other parts of buildings. This is why when doors serve as a central point of access or means of separating a room, you have to make sure that they remain closed firmly and reliably should the worst happen. Because they can stop fire and smoke in their tracks and gain valuable seconds for the rescue services to reach anyone trapped. In such cases, multi-point locking systems have a very important part to play.

Legal basis

In the case of fire and smoke protection doors, all fitting components and accessory parts must be tested for their suitability and persistent functionality. Proof of suitability is prescribed for fittings used in fire and smoke protection doors, as well as accessories. Proof of compliance is demonstrated by means of a general construction inspection test certificate, corresponding to Construction Rules List A part 2, seq. no. 2.11, for each item manufactured, with a certificate of compliance issued by a recognised accreditation body. A precise definition of product suitability is laid down in the "General construction inspection test certificate". Each construction product used for fire and smoke protection doors therefore has to display its suitability by means of the compliance symbol ("Ü" symbol), CE symbol or a general construction inspection test certificate. Multi-point locking systems are subject to the requirements of DIN 4102-18: 1991-03, internal plant production inspections and certified by means of the "Ü" symbol.

Winkhaus multi-point locking system, fire protection

Winkhaus has a "General construction inspection test certificate" for single and double sash fire and smoke protection doors, issued by the MPA NRW, doc. No. 9.19. Suitability for fire protection doors is thus proven. In individual cases, application with the point of certification of the construction element must be determined. Multi-point locking systems from Winkhaus with panic function are also suitable for single and double sash fire protection doors and are classified and labelled according to EN 179/1125.

Note

Fire-protection turn sash doors may only be used in conjunction with certified locking systems, door closers, hinges and knob-and-handle sets. The fittings and accessory parts which ought to be used on fire protection elements can be found in the "General building inspection approval" for the fire/smoke protection element. When using keeps, pay attention to their particular appropriateness for fire protection.
pyroLock

pyroLock M hook

pyroLock

pyroLock lock case

pyroLock

pyroLock B bolt

When using keeps, the primary concern is safety, as people’s lives are at risk in the event of a fire. But at the same time, goods should be protected and the fire checked as well.

Winkhaus pyroLock B is certified by the MPA NRW, Do. No. 9.19. with a “General construction inspection test certificate” for single and double sash master fire and smoke protection doors (only with inactive sash locks protected against incorrect operation).

Winkhaus security door locking systems with anti-panic function according to DIN EN 179 and DIN EN 1125 are also suitable for fire- and smoke-protection doors as standard.

Areas of application

  • FS – Fire protection doors
  • RS – Smoke protection doors

Designs

  • pyroLock B
  • panicLock M and BM (according to DIN EN 179/1125)
  • panicLock AV2OR 179 (according to DIN EN 179)
  • further details/ designs on request
Prüfzeichen MPA NRW

MPA NRW test certification

Standard variation 60

with 2 hooks for standard house doors with a sash rebate height of 1875 to 2230 mm (F2060 M2)

Standard variation 60 with entryguard

with 2 hooks for standard house doors with a sash rebate height of 1875 to 2230 mm (FW2060 M2)

Standard variation 60

with 4 hooks for standard house doors with a sash rebate height of 1875 to 2230 mm  (F2060 M4)

Variation 06

with 2 bolts for standard house doors with a sash rebate height of 1875 to 2230 mm (F2006 B2, F2406 B2)

Note

Winkhaus security door locking systems with anti-panic function according to DIN EN 179 and DIN EN 1125 are also suitable for fire- and smoke-protection doors as standard.
Declaration of performance in accordance with Construction Products Regulation (BauPVO)

Here you will find the current performance explanations of the relevant products

Declaration of performance